TinkerForge 2128 Colour sensor Suitable for (single board PCs) TinkerForge 1 pc(s)
With the Color Bricklet 2.0, bricks can measure the color, color temperature and illuminance of a light source. With the Bricklet, the color of an object can thus be measured via its reflected light. In order to achieve uniform lighting with a defined...
TinkerForge 2144 Laser range finder Suitable for (single board PCs) TinkerForge 1 pc(s)
With the Laser Range Finder Bricklet 2.0, Bricks can measure distances and speeds. This is done with a runtime measurement of laser pulses.The Laser Range Finder Bricklet 2.0 has a 7-pin Bricklet plug and is connected with a 7p-10p Bricklet cable with...
TinkerForge 2145 Loudspeaker Suitable for (single board PCs) TinkerForge 1 pc(s)
The Piezo Speaker Bricklet 2.0 can be used to generate sounds with different frequencies and volume bars with Bricks.The available frequency range is 50Hz to 15000Hz. The volume can be adjusted between 85dB(A) and 110dB(A).In addition, the Bricklet has...
TinkerForge 2146 E-paper display Suitable for (single board PCs) TinkerForge 1 pc(s)
The E-Paper 296x128 Bricklet is an E-Paper display with a resolution of 296x128 pixels.Each pixel can be set individually, so the display can display graphics. The contents of the display remain when the Bricklet is disconnected from the power supply.The...
TinkerForge 276 GPS module Suitable for (single board PCs) TinkerForge 1 pc(s)
With the GPS Bricklet 2.0, bricks can determine their position via GPS. It is also possible to obtain motion data (direction and speed), altitude information (height and geodial separation), as well as highly accurate time and date information with PPS...
TinkerForge 277 RS485 expansion module Suitable for (single board PCs) TinkerForge 1 pc(s)
With the RS485 Bricklet, Bricks can receive and send differential data via RS-485.It supports half and full duplex and has configurable termination.The Bricklet has three modes:· RS485· Modbus RTU Master and· Modbus RTU Slave.In RS485 mode, any data...
TinkerForge 278 Thermal imager Suitable for (single board PCs) TinkerForge 1 pc(s)
The Thermal Imaging Bricklet is equipped with a 80x60 pixel infrared camera. The Bricklet can be connected to Bricks.The Bricklet uses a FLIR Lepton sensor with radiometry and shutter. The sensor can measure temperatures between -10°C up to 450°C with...
TinkerForge 282 LED module Suitable for (single board PCs) TinkerForge 1 pc(s)
The RGB LED Bricklet is equipped with a button whose background lighting can be controlled by software. The Bricklet expands Bricks.The status of the button (pressed, not pressed) can be read out and the color of the LED can be controlled. The red, green...
TinkerForge 293 Frequency counter 1 pc(s)
The Industrial Counter Bricklet can be used to extend bricks by four independant frequency counters.The Bricklet has an integrated edge counter that can measure the duty cycle, period and frequency separately per channel. Frequencies up to 4MHz can be...
TinkerForge 34 TinkerForge Suitable for (single board PCs) TinkerForge 1 pc(s)
With this Ethernet extension can be integrated in a LAN bricks and brick lets 10BaseT/100BaseTX Ethernet is supported and the module is 1000BaseTX compatible. The extension is available in two versions: In the PoE version, it has an integrated PoE power...