Appoldt 2115 CMX60D20-24-MS11 SSR, For DIN Rail
SSR for mounting on TS35 DIN rail. Particularly suitable for wear-free control of resistive, capacitive and inductive loads such as motors, contactors and valve solenoids.
Appoldt 2404 POK22-24V/25 DC / DC Power Optocoupler
Solid state relay in a narrow, closed housing for DIN-rail TS35. Power Optocouplers are widely used as output elements of PLC control systems and are suitable for switching of resistive, capacitive and inductive loads such as solenoid valves, motors and...
Appoldt 5100 Power supply unit (L x W x H) 42 x 35 x 85 mm 1 pc(s)
Power supply for power controller PP10V (part no. 18 43 53 and 18 43 67) and PA100V (part no. 18 72 24 / 18 43 94). Transformer with screw fastenings and secondary 100 mA fuse mounted on a mounting base. Suitable for DIN rail TS35.
Appoldt AWG-0-10V Encoder module 1 pc(s)
This setpoint generator controls output of an analog signal in case of an emergency from 0 - 10 V, among other things, valves, mixing flaps or temperature values. Via a 2-stage switch is used to switch the module in 2 modes of operation (manual/auto)....
Appoldt AWG-4-20mA Encoder module 1 pc(s)
This setpoint generator controls in case of an emergency output of a analogue signal of 4 - 20 mA, among other things, valves, mixing flaps or temperature values. Via a 2-stage switch is used to switch the module in 2 modes of operation (manual/auto)....
Appoldt Dimmer & Soft Start Module
When connected to a solid state relay, this module (electronic power controller) can be used for actuating resistive loads. 24 V/AC 80 mA in the same phase is required for the voltage supply and the dimmer/soft-start control.
Appoldt Monitoring relay 230 V AC 2 change-overs 1 pc(s) TM-W PTC monitoring
The relay operates with all the PTC resistors according to DIN 44081 as far as the sums cold resistance in series 1500 Ω not exceed. The device operates according to the quiescent current principle, which means that the measurement circuit is open....
Appoldt PA-Box-230 Dimmer box soft start module 1 pc(s) Switching voltage (max.): 250 V AC (W x H x D) 80 x 75 x 125 mm
Dimmer-Box-Softstartmodul,ready to snap on heat sink forT35 in touch-proof grid housing. Load control 0 - 100 %, Controlvoltage 0 - 10 V/DC or Potentiometer 10 kΩ.This text is machine translated.
Appoldt POK 100V/10A SSR Nominal voltage: 24 V DC Switching current (max.): 10 A 1 pc(s)
Connection (components): Screw terminals; Factory colour: Grey-orange; Max. temperature: 50 °C; Min. temperature: -20 °C; Nominal voltage: 24 V DC; Product size (height): 62 mm; Product size (length): 62 mm; Product size (width): 17 mm; Relay features:...
Appoldt Rail-mount USB stick 1 pc(s) USB2.0-16GB-A IP54
Free CDs or USB sticks, directly in the cabinet must be kept, often lost. In the casing Integrated USB-Stick creates through the direct mounting on the DIN rail remedy. It is ideally suited for the digital document filing of, for example, switching, overview,...